Welded Gabion Box

Made of steel wire, welded gabion box is in different treatment types, such as HDG wire, HDG after manufacturing, powder coating, etc.. Instead of lacing wire in woven gabion, for welded gabion box, each panel is connected by spiral tensile wire to form a box structure. Comparing to woven hexagonal gabion, welded gabion box is more rigid in shape. By covered with certain geotextile inside, welded gabion box is the ideal material for build up a defensive barrier fast and easily in military combat. We have been producing this design since the developing stage of DEFENSIVE barrier.

Material

• Material: Low carbon iron wire, stainless steel wire
• Mesh Size: 50x50mm, 75x75mm, 100x50mm, 100x100mm
• Box Size: 2x1x0.5m, 1x0.5x0.5m, 1x0.6x0.4m etc.
• Diameter: 2.5-6.0mm
• Pattern: welded
• Packing: In pallets
• Tensile Strength: 380-550 N/MM2
• Certificate: ISO9001

Specification

Details

Mounting connections such as hog rings, clips and hook also available as below :

Production Process

How to install welded gabion box?

• Step 1. Ends, diaphragms, front and back panels are placed upright on the bottom section of wire mesh.
• Step 2. Secure panels by screwing spiral binders through the mesh openings in adjacent panels.
• Step 3. Stiffeners shall be placed across the corners, at 300mm from the corner. Providing a diagonal bracing, and crimped over the line and cross wires on the front and side faces. None are needed in interior cells.
• Step 4. Gabion box filled with graded stone by hand or with a shovel.
• Step 5. After filling, close the lid and secure with spiral binders at the diaphragms, ends, front and back.
• Packing: In pallets
• Step 6. When stacking tiers of the welded gabion box, the lid of the lower tier may serve as the base of the up

Application

Free Standing Walls

Landscape Wall

Cladding

Gabion Architecture

Packing & Loading